Acrilum primer "Brigade" penetrating for internal work 10l

• The primer has a high penetrating ability.
• strengthens the surface and provides adhesion for subsequent coatings.
• prevents the growth of bacteria, mold and fungus.
• It is fireproof and non -toxic.

Scope

• is suitable for internal work.
• is used for diluting, strengthening and processing of porous, strongly absorbing surfaces before applying dispersive and decorative coatings. For example, for painting walls and ceilings inside dry rooms with normal humidity. It can be used in the corridor, bedroom, living room, hallway, office and inside industrial premises that do not require high -quality finishes.

is suitable for the following types of surfaces

• brick.
• concrete.
• gypsum -plane.
• plastered.
• wooden.
• and other porous surfaces. << /li >

surface preparation

Remove the fragile layers of old paint and whitewashing. The base should be clean, durable and dry. Mix the primer and apply with a brush, a roller or a spray gun from the corner to the corner according to the principle of “wet along the wet” in 1-2 layers, depending on the absorption of the base. Carry out the procedure at a temperature of not lower than +5 ° C with an intermediate interlayer drying 24 hours.

Consumption and drying time

average consumption: 0.2–0.3 l/m² in 1 –2 layers, depending on the absorption of the base. Drying for casting: 1 hour. Complete drying: 24 hours at +18 ° C.

Safety measures

are not recommended to mix with other types of paintwork and solvents. If you get on the face and eyes, rinse these areas with warm water.