Acrylic enamel for radiators and metal structures ER-210, 1 kg

Emal for radiators and metal structures of the Super-White ER-210 is distinguished by exceptional whiteness, good covering and impeccable quality. After drying, it forms a half -glossed coating with an abrasion cycle of more than 10,000. It contains corrosion inhibitors in its composition.

purpose. The enamel for ER-210 radiators is a super-efficient semi-glossy is designed for radiators, heating pipes and metal structures. It withstands the temperature up to 100 ° C. The EMAL ER-210 does not change the color under the influence of high temperatures. After drying, it forms a smooth, elastic, resistant film. Also suitable for external and internal work on wooden, concrete, brick, plastered and other surfaces.

Recommendations for use. The product is completely ready for use. Before application, it is necessary to prepare the surface responsibly. The base should be clean, durable, dry, cleaned of dust, dirt, from the exfoliated and obscure old paint, it is also necessary to remove the entire rust, then treat the surface with a rust converter, degrease, and if necessary, will be redeemed, and then primed. Before applying the enamel, mix thoroughly. Apply with a brush, roller or spray gun. Coloring is best done when the radiators are not connected to the heating system. Otherwise, the enamel will have a smaller spreading coefficient, which will increase the complexity of staining. The air temperature and the processed surface is from +5 ° C to +35 ° C. The relative humidity of the air is 65 ± 5%.

• withstands a temperature of up to 100 ° C.
• Strengtility to abrasion.
• does not change the color of the color in Operation process.

Consumption. 150-250 g/m² depends on the base.

drying time. For casting - 3 hours. A two -layer application is recommended, with drying between layers - 12 hours. Complete drying after 24 hours. The process of full polymerization of the film and the achievement of maximum indexes in abrasion ends on average after 28 days.