Aluminum lubricant 3TON, TS-524, 520 ml

Designed to protect parts and mechanisms from bullying, jamming, corrosion sintering, as well as exposure to high temperatures and aggressive media. It is used in the installation of the brake system, exhaust gas production systems, turbines, suspension parts, fittings, oil and gas burners. Facilitates the dismantling of parts and mechanisms after prolonged operation. Respiring salts, as well as leaching with hot and cold water. The operating range of temperatures is from - 40C to + 1000 ° C.Plore: before use, clean the treated surface from old lubricant, scale, loose rust and dry. Before use, shake the balloon vigorously (20-40 shakes). From a small distance, a thin layer spray the lubricant on the processed surface. The amount of applied product depends on the field of application. At the end of the work, in order to avoid clogging of the spray head, it is recommended to turn the balloon upside down and spray 2-3 seconds until the composition ceases to act. At low temperatures due to a decrease in pressure in the cylinder, the spraying of the composition may be difficult or not at all. To restore initial properties, it is recommended to withstand the cylinder at room temperature for some time.