Antichlore Super - Pool 5 L

appointment

In accordance with the requirements of sanitary and epidemiological safety and maintenance of water in pools within the sanitary standards, the Super-Pul Algicide tool is intended for the destruction of algae and fungi and the prevention of their formation in swimming pools with running water: with fountains, anti-flows, Hills, in SPA basins, water parks. It is used for antifungal treatment of sanitary equipment, showers, tiles, plastic, rugs, flooring. The tool should be used as part of a comprehensive water treatment of pools and fountains, anti -inflacal processing of bathrooms, bathrooms. It is recommended to use in combination with oxidizing drugs.

Method of application

At the beginning of the complex processing, adjust the pH level to a value of 7.0-7.6. Then conduct disinfection of water with chlorine drugs and re-adjust the pH level to a value of 7.0-7.6.

Process the walls of the pool, gutter, bottom plums, rubber rugs, flooring, etc. Parts dissolved in water with a drug at the rate of 1 liter of algicide per 10 liters of water; Let it dry completely and fill the pool.

Add algicide to the water after filling the pool and conducting complex processing.

After the water treatment of the pool by algicide, if necessary (in the presence of suspended particles in the water of the pool), conduct water treatment with a coagulant.

The processing of the pool should be carried out in the absence of bathing, for open ponds is preferably in the evening. If there is no need to process water by a coagulant, then 30 minutes after the introduction of a daily dose of algicide (35-50 ml of a 10m3 agent), you can allow bathing.

add a solution of algicide diluted by water by 5-10 times directly into the pool when filtered near the feeding line.

Recommended dosages:

Standard processing: 35-50 ml of agents for 10m3 water weekly. With intensive use of the pool, it is necessary to increase the frequency of use and/or dosage in accordance with the indicator of the content of the product in water.

First processing: 70-100 ml of 10mm3 water. A technical break is required in the pool at least 8 hours with continuous filtering. Then rinse the filter thoroughly. This dosage is considered basic and can vary depending on the individual characteristics of the pool and climatic conditions.

It is necessary to increase the dose:

• with a large amount of bathing;
• at high air temperatures;
• at heavy rains.

If the water tends to The formation of lime raids, the dose should be increased by 2 times.

• adjust the pH to 7.0-7.6, then make the drug in the amount of 300 ml per 10 m3vods.

With high clogging with algae, conduct shock treatment with a chlorine disinfectant.

shock processing must be carried out until the water in the pool becomes transparent.

Precautions

Do not get inside! Use only for its intended purpose! Do not mix with other means!

Cailing to get into the eye and on the skin! Protect from children!

When working with a concentrate, use rubber gloves! If a concentrate gets on the mucous membrane, it is immediately abundantly rinse with water, when it enters the skin with water with soap. If necessary, consult a doctor. In case of the strait, remove the product with sand or sawdust. Rinse the contaminated surface with water. Avoid the entry of concentrate into the environment: water bodies, soil, sewage.

Upon the expiration of the expiration date, dispose of as a household waste.

TU 20.59.59–009–98205538−2017

storage

Shelf life: 24 months from the date of manufacture.

Storage conditions: Store in a sealed packaging in a dry, cool place, far from sunlight, heating devices, at a temperature of not higher than 40 ºC. Upon the expiration of the expiration date, dispose of as a household waste. During storage, a slight sediment is allowed.

composition

Polymer quarterly compounds of ammonium, polyhexamethyleneguanine hydrochloride, stabilizer, purified water, food dye.