Antiseptic for responsible designs Prosept Ultra, concentrate 1:10, 5 liters

Antiseptic inaccessible to the responsible pro -Sept structures is an unexplored antiseptic for wood structures operated in the most unfavorable conditions. Designed for enhanced protection of wood of various breeds in severe operating conditions-with prolonged contact with the soil and direct effects of atmospheric precipitation.

provides protection against house fungus, rot, mold, two-year-old insects for up to 50 years, depending from the processing method and conditions of the wood service. It is also used for impregnation of wood on an industrial scale by the “vacuum-pressure-vakuum” method, soaking, etc.

Prosept Ultra is a modern antiseptic based on copper and biocid compounds and animals. The composition deeply impregnates the wood, turning it into an unsuitable environment for the life of microorganisms and insects. The strength characteristics of the material do not change, wood can be glued and painted.

Advantages:

• The timing of wood protection up to 50 years;

• does not contain carcinogens, chromium and arsenic;

• The processed surface is safe for humans and animals.

Method of application:

work at ambient temperature and treated surface at least +5 ° C. To dilute the solution, use plastic products.

to process wood by applying or short -term immersion into a bath with a solution, it is necessary to dilute the antiseptic with water in a ratio of 1:10.

• Clean the treated surface from dust from dust , sawdust, shavings, etc.

• applying a working solution with a brush, a roller with a synthetic pile or with any spraying device, in 2-3 layers, with intermediate dryers for 20-30 minutes. When diving - the aging time for 5-10 minutes.

impregnation or soaking:

• It is necessary to dilute the antiseptic with water in a ratio of 1:19. Sin -soaked in baths. The duration of the soaking is at least 6 hours.

for impregnation in the autoclave, to carry out according to the instructions of the manufacturer of the equipment, or contact the service department of the manufacturer of the antiseptic to obtain detailed instructions. The absorption of the protective agent and the impregnation depth, during industrial processing, must comply with the requirements of GOST 20022.0.

To ensure antiseptic properties, it is important to comply with the recommended consumption of the working solution.

processed wood should be protected from water and water and water. Atmospheric precipitation until completely dry, at least 24 hours. The final fixation in the wood occurs after 15 days. During this period, wood can be used for work.

Consumption: 250 - 350 g/m².

Precautions: Antiseptic is incompatible with compositions based on chromium. Make sure that pre -wood has not been covered with a protective composition with chromium content. When working with an antiseptic, use personal protective equipment: glasses, gloves, overalls. If you get on the skin, wash off a lot of water. If necessary, consult a doctor. Protect from children!