Antiseptic Ground for OSB-stamps Prosept OSB Base, 5 liters

Antiseptic Ground for OSB-stamps Prosept-it effectively creates a strong adhesive moisture-resistant layer on the surface of the OSB, DSP, GVL, CSP plates, and also provides reliable protection from bioporations, mold, mushrooms and swelling. Prevents the destruction of plates even in wet rooms. The product is intended for pre -processing the surface before applying decorative plasters, paints, putty to ensure adhesion, reduce the consumption of finishing coatings and ensure the protective effect. The surface tints in a light yellow color.

Advantages:

• contains an effective complex of antifungal additives not washed by water;

• does not violate the vapor permeability of the material, reducing the vapor permeability This isolation of harmful substances from OSB;

• is used indoors, as well as for work under a canopy, including under the lining, roof.

Method of application:

• Apply on a clean dry surface with a soft brush, by spraying at a temperature of at least +10 ° C. Application should be plentiful and uniform over the entire processed surface in 2 layers with an intermediate drying in 40-60 minutes.

• To preserve the properties of the soil, it is important to observe the recommended consumption of the working composition of 100-200 g/m2.

Consumption: The flow rate of the working solution is 100-200 g/m2, depending on the characteristics of the surface.

Precautions: When working with an antiseptic, use individual protective equipment: glasses, gloves. If the solution enters the skin or into the eyes, rinse with a large amount of water, if necessary, consult a doctor. Protect from children!