APEYRON ELECTRICS power supply for 12 V LED tape, 12 W, IP44

The power supply (adapter) 03-54 is designed for converting alternating voltage ~ 230 V / 50 Hz into a constant stabilized 12 V. Suitable for connecting LED ribbons, lamps, lines and modules with a voltage of 12 V. Provides from overload, overheating and short circuit Therefore, it is safe to use. The white body is made of ABS+PC. It has an aesthetic look and does not lose its properties when heated. Size 75x30x43mm. The adapter is equipped with a connector of 2.5x5.5 mm, which makes the connection of the devices fast and comfortable. Cable length is 1500 mm. The degree of protection against dust and moisture IP44 means that the block has protection against comprehensive spraying and it can be used in wet zones without a direct hit of water jets (it is recommended to remove at least 20 cm from a water source). The adapter is a ready -made solution: is equipped with cables, a fork of the European standard, a wire switch and a connector for connecting devices. The product has a low level of pulsation of the output voltage.

Advantages:

compact size, light weight;

- high stability and low pulsation of the output voltage provides uniform glow;

< P>- built-in protection against overload, overheating and short circuit;

- high efficiency> 80%;

- the IP44 dust protection class makes it possible to use the adapter in conditions of comprehensive spraying;

- tested at 100% load;

- the power supply is equipped with a 2.5x5.5 "" dad "connector, the European standard fork and the switch on the wire.