Aquadache basin "4 in 1 pure water", without chlorine, 3 liters

Aquadache basin "4 in 1 pure water", without chlorine, ENITS OF ALL in the pool and prevents their formation, eliminates the clouding of water; destroys pathogenic bacteria, viruses, mushrooms; prevents the formation of lime deposits on the solid surface of the pool and equipment bowl; prevents the appearance of rust deposits and helps to remove them.

Effective for a long time. It can be used in pools with turbulent water (slides, gas stories, jet atractions, etc.) is compatible with any filter installations, disinfectants and auxiliary processing products used in basins. Does not change the level of pH of water.

Method of application: Geres with water filling with water - to treat the walls of the pool with Algicid, after filling the pool with water, carry out primary disinfection with chlorine -containing or oxygen -containing disinfectants to check the pH of water and bring its value to the concentration of active chlorine recommended by 7.2-7. 0.3 - 0.5 mg/l) the dosage is made according to the table on the package (see photo label on the product card). Dissolve the selected amount of the product in 0.5 liters of water and add to the pool in portions near the water supply site (not before filters) during the operation of the pump or in several different places around the perimeter of the pool.

With intensive use of the pool, high water hardness, high temperatures and abundant precipitation, it is recommended to increase the frequency of administration of the product. 

In public pools, the product can be used for additional water treatment, regardless of the type of disinfectants used.

Composition: aqueous solution of polymer quarter -based ammonium salt, polycarbon acids.