ASTROHIM glue, aerosol, 210 ml AC9008

Astrohim Glue spray - high -quality aerosol glue for gluing with each other in any combinations of fabric, non -woven, including porous materials (natural and artificial leather, fabrics, felt, cardboard, rubber, foam, mineral wool, etc. ), wood, plastics, as well as gluing them on solid load -bearing surfaces of plastic, metal, wood, glass and so on. It can be used in the repair of seats and upholstery of the passenger compartment, for pasting the hulls of subwoofers and musical shelves, for gluing the elements of the finish in the car, during the installation of noise and thermal insulation.

Advantages:

• can be used to create compounds of different strength: temporary, long -term or working under load. At the same time, ensuring the ability to change the possibility of changing the positioning of glued materials within 15 minutes after applying the glue.
• has a low absorption ability and excellent covering properties. It is evenly applied and quickly dries.
• is convenient for gluing surfaces of large areas. A special spraying head with a spray torch of the torch of the torch allows you to apply glue in dosage and directed.

Recommendations for use:

• Before use, clean and degrease glued surfaces.
• Pre -test the glue in the local area.
• To create a high -quality connection of the work to produce at an environmental temperature from +15 to +25 ℃.
• Enerfully shake the cylinder before applying the glue Within 30 seconds.
• to create temporary fixation (only for strong and incorrect surfaces): apply a thin even layer of glue from a distance of 20-30 cm to one of the surfaces. After a few seconds.
• leave for 1-2 minutes to dry.
• to create long-term gluing: apply glue with an even layer on both surfaces from a distance of 20-30 cm and leave for 2 minutes.
• Then tightly press the surface to each other for 5-10 seconds.
• When gluing porous and highly absorbing surfaces if necessary, the glue is applied to 2 layers.
• When creating responsible connections operating under load, it is necessary to shut up gluing at least 24 hours.
• After using the glue, it is necessary to turn the balloon upside down and blow the nozzle until the gas begins to exit.