Astrohim liquid is silver, aerosol, 520 ml, AS - 656

A multifunctional tool for protective and decorative staining of cars, cycling, domestic use.Great for external and internal auto -touches (hood, front and rear bumper, radiator grille, mirrors, moldings, pens, chrome elements, dashboard, discs and any other details).- forms a wear -resistant coating of black, allowing the car to give an individual and stylish look.- protects the paintwork from scratches, chips, road reagents, significantly extends its service life and protects against corrosion.- gives the body soundproofing properties, reduces vibrations.- Combining the advantages of paint and vinyl film, the composition is easily and evenly applied using aerosol, while forming an impact -resistant elastic coating resistant to mechanical stress.- easily removed by hands without using additional materials.- after removal, does not leave traces.- has an excellent clutch with various surface types (paintwork, plastic, glass, chrome).- Astrohim liquid rubber is economical when applying due to good covering ability.- quickly dries in natural conditions without the use of household and building hairdries and heat guns.- the formed coating retains elasticity and high decorative properties for a long time, does not crack at temperature differences, perfectly retains its properties in extreme weather conditions.- can be used in domestic conditions.Application: 1) Before applying liquid rubber, thoroughly clean and degrease the surface.We recommend using Antilicon.Universal degree Astrohim "2) Enerfully shake the cylinder for 2-3 minutes.To obtain high -quality coating, it is recommended to apply the composition at an environmental temperature from + 15 to + 25C with moderate humidity and complete absence of wind, avoiding direct sunlight.3) try the action of the composition in a small inconspicuous area to make sure that the paintwork will not react with it.4) protect the elements that are not subject to coloring, with a painting tape or film in order to avoid traces of the composition of the composition.5) apply the "AstroHIM liquid rubber" from a distance of 18-20 cm to 3-5 layers with an intermediate drying at least 15 minutes with smooth and uniform movements.6) shake the cylinder in the intervals between application.7) drying time at a temperature of +20s: "for casting" - 30 minutes., full time of drying - 4 hours.Drying time depends on the thickness of the coating and ambient temperature.The more layers and below the temperature, the longer the drying period.8) The coating acquires final hardness after two to three days, during this period it is not recommended to wash the painted car, but it is possible to operate 12 hours after applying the finish layer.9) In order to avoid clogging of the spray head, it is recommended to turn the balloon upside down at the end of the work and spray until the clean gas is supplied.10) if necessary, the coating is easily removed after complete drying.To do this, carefully, so as not to damage the paintwork, pick up the film, starting from the corner of the part.Consumption - 1 cylinder per 1-1.5 kV.m depending on the number of layers.