AstroHIM liquid rubber, aerosol, 520 ml, AS - 651

A multifunctional tool for protective and decorative staining of cars, cycling, domestic use. Great for external and internal auto -touches (hood, front and rear bumper, radiator grille, mirrors, moldings, pens, chrome elements, dashboard, discs and any other details).

Advantages:

• forms a wear -resistant coating of black color, allowing the car to give an individual and stylish appearance.
• protects the paintwork from scratches, chips, road reagents, significantly prolongs its service life and protects against corrosion.
• gives the body soundproofing properties, reduces vibrations.
• combining the advantages of paint and vinyl film, the composition is easily and evenly applied using aerosol, while forming an impact -resistant elastic coating, resistant to mechanical stress. Li>
• is easily removed by hands without the use of additional materials.
• After removal, it leaves no traces.
• has an excellent clutch with various types of surface (paintwork, plastic, glass, chrome).
• Astrohim liquid rubber is economical when applying due to good covering ability.
• quickly dries in natural conditions without the use of domestic and building hairdries and heat guns.
• The formed coating form retains elasticity and high decorative properties for a long time, does not crack at temperature differences, perfectly retains its properties in extreme weather conditions.
• can be used in domestic conditions.

Recommendations for use:

• Before applying liquid rubber, thoroughly clean and degrease the surface.
• Enerfully shake the balloon for 2-3 minutes.
• It is recommended to apply the composition at a temperature Wednesdays from + 15 to +25 ° C with moderate humidity and a complete absence of wind, avoiding direct sunlight.
• Test the action of the composition in a small subtle area to make sure that the paintwork will not react with it.
• Protect the elements that are not subject to painting, painting tape or film to avoid the traces of the composition on them.
• smoothly and uniform movements apply the “Astrohim liquid rubber” from a distance of 18-20 cm in 3-5 layers with an intermediate drying for at least 15 minutes.
• in the intervals between the application, shake the balloon.
• The drying time at a temperature of +20 ° C: “For Paces”-30 minutes. , the full time of drying is 4 hours. The drying time depends on the thickness of the coating and ambient temperature. The more layers and lower the temperature, the longer the drying period.
• The coating is finalized after two to three days, it is not recommended to wash the painted car during this period, but it is possible to operate 12 hours after applying the finish layer.
• , in order to avoid clogging of the spray head, it is recommended to turn the balloon upside down at the end of the work and spray until the clean gas is supplied.
• , if necessary, the coating is easily removed after completely drying out.
• For this, carefully, so as not to damage the paintwork, pick up the film, starting from the angle of the part.
• Consumption - 1 cylinder per 1-1.5 square meters. m depending on the number of layers.