Automatic vacuum cleaner for the pool, 28007

Automatic vacuum cleaner is designed to clean the bottom of the pool with full immersion under water.

the vacuum cleaner is connected to the nozzle in the pool for water intake in the filter pump. For the most efficient operation, a filter with a capacity of 3,407 to 5 678 l/hour is required. Before use, it is recommended to break the system, since the accumulated air in it can lead to a filter pump breakdown.

, under the influence of water absorption in the vacuum cleaner, a mechanism is launched that drives the robot, and also changes the direction of movement. Large precipitate and dirt settle on a special grid and remain in the trash tray inside the vacuum cleaner. Smaller, light-it is sent further to the filter pump and settles on the filter element.

characteristics

• float for the hose
• corrugated hose: 8, 8, 8, 8, 8, 5 meters, diameter 28 mm
• adapter for connection: connects to the inlet connector 38 mm nozzle 32 mm
• type of cleaning: absorption
• inlet brush
• Garbage container

equipment

• ring - seal: 2
• case: 1
• Garbage grid: 1
• The lower cover of the case: 1
• support for the brush: 4
• brush: 16
• adapter for the hose: 1
• hose: 1
• float for the hose: 1
• hose carvings: 2