Bearing the engine LAVR ML202, 320 ml

The engine of the engine ML202-classic liquid formula for the disconnecting of the cylinder-piston group. The composition is suitable for cleaning all types of gasoline and diesel engines, which for the first time or recently diagnosed symptoms of hair sections. It has a high penetrating ability and gentle effects: after applying this shift, the engine can be operated at increased speeds. Effectively eliminates problems such as the average overspending of oil, reduction of power, deterioration of dynamics and acceptance, increased fuel consumption, compression difference in cylinders. The product is recommended for use for regular operation in urban traffic. The exposure time varies depending on the degree of engine pollution of up to 12 hours without risk to damage rubber seals, the paint of the crankcase and the antifriction coatings of the cylinders.

Advantages:

• ML202 gimming is suitable for the ML202 engine is suitable for the use of any type in gasoline and diesel engines.
• is used at the first signs of the hair wax
• compression and oil-cutting rings
• restores compression when deviated from the norm from 15-20 %
• Recommended for oil consumption up to 100 ml per 1000 km of run on atmospheric engines and up to 500 ml per 1000 km of run on turbocharged engines
• reduces oil and fuel consumption
< Li> Exposure time from 1 to 12 hours
• Produced packaging are designed for engines with a volume of up to 4 liters
• does not require removal of the Carter pallet
• the procedure is carried out with a mandatory replacement Oil
• The kit includes detailed instructions for the use of shifts, an extension pipe and a syringe

application:

• for the best effect of the drug to warm up the engine to the operating temperature (not lower than 70 ° C). This will prevent the failure of the high -voltage part of the ignition system and the possible ignition of the vapor of the drug.
• for the gasoline engine - to dismantle the spark plugs. For diesel - an incandescent candles or nozzles.
• put the pistons in a position close to the middle, turning the crankshaft by the pulley mounting nut, or with the help of the drive wheel when the transmission is turned on (on cars with a mechanical gearbox). You can determine the positions of the pistons through the technological holes with a long probe.
• Using a syringe with an extension pipe, pour the equal amount of liquid into each cylinder. Close the technological holes (for example, screw the spark plugs into several turns) to form a “steam bath” in combustion chambers.
• For preventive cleaning, withstand 1 hour. With significant lawsing, increase the exposure time of the drug to 12 hours. In order for the liquid to seep better into the area of ​​the piston rings, it is recommended to turn the crankshaft for 1-2 revolutions every 10-15 minutes.