Coagulant Aqualand, 1 l

The coagulant is designed to eliminate the smallest balanced particles that are present in the water of the pool. The tool effectively makes non -refildable water pollution filtering. Apply for turbidity or insufficient transparency of water in the pool, when flushing the filter does not bring the necessary result.

Method of application: Before using the coagulant, you should check and if necessary bring the level of pH of water (7.0–7.4 ) and the amount of free chlorine (0.1-0.5 mg/l). It is recommended to use the coagulant even with the usual processing of water at least once a week to clean the bottom and the walls of the pool of accumulated precipitation.

water purification in a private pool:

• at the beginning of the season at the beginning of the season and with high turbidity of water: 0.5 liters per 25 m³ of water.
• regular processing: at a chlorine level of not more than 0.5 mg/l and pH level from 7.0 to 7.4 - 0, 0, 0, 0, 0, 25 liters of coagulant, diluted in 10 liters of water for every 10 m³. Then, with stopped filtration, the resulting solution of watering can be poured around the entire perimeter of the pool. After that, the water in the pool is at least 12 hours. A layer of flakes and suspensions from the bottom of the pool is collected by a water vacuum cleaner and sent to the sewer.

Water purification in a public basin:

The coagulant is injected with a dosing device through the distribution device into the water supply system From the calculation of 10 to 20 ml/m³ (depending on the turbidity of water) to the sand filter. It is not allowed to pass the drug through filtering if the filter is diatomite or on cartridges. After setting the required amount of the drug, filtration is turned off and given to water for at least 20 minutes. A layer of flakes from the bottom is removed using a water vacuum cleaner, then the water in the pool is turned on. If the clouding of water is not completely eliminated, the filter is washed and the processing is repeated.

Composition: contains aluminum polyoxicchloride.

safety measures: work with the drug should be in rubber glasses and goggles. When the product gets into the eyes and on the skin - rinse the affected areas with a large amount of water, if necessary, consult a doctor. Take care of the children!

Storage: Keep in a hermetically sealed container in a dry, cool place. Protect from humidity. Avoid direct sunlight.

Shelf life: 1 year. A slight sediment is possible.