Coagulant for water purification, 10 tablets, 250 g

The product is designed to eliminate clouding of water in the pools. In a dissolved state, compatible with disinfectants and auxiliary products of water treatment.

Composition: aluminum sulfate.

check the pH and bring it to the value in the range of 7.2–7.4. And the content of free chlorine - up to 0.3-0.5 mg/l.

for cleaning water in the pool without a filter, the dosage is selected experimentally, starting from 1 tablet per 4 m³. The tablet must be dissolved in a separate container, then pour the solution from the watering can along the perimeter of the pool. Give the water in the pool to stand at least 12 hours. The besieged layer of flakes and a suspension to collect from the bottom with a water vacuum cleaner. With high drooping and after shock chlorination, the dosage of the coagulant can be increased to 200 g (8 tablets) by 10 m³ of water.

To purify water in the pool with a sand filter, you need to place tablets without a case in a skimmer or auto -doster to sandy Filter from calculation 1 tablet per 1-2 m³ (depending on turbidity). Turn on the pump for circulation mode. After dissolving the tablets, turn off the pump and let the water settled for at least 12 hours. The besieged layer of flakes and a suspension is assembled from the bottom with a water vacuum cleaner and directed into the sewer. Turn on the filter and repeat the processing.

Do not miss the drug through the filter on diatomite or on cartridges.

During the action of the coagulant, the effect of a whiteness of water is possible, which disappears after the precipitation of flakes and suspension.