Concrete contact for external and internal work "Light", 6 kg

Clushing primer concrete contact Light for external and internal work PG100 TM "Professional" with quartz filler is used for preliminary processing of concrete, concrete blocks, foam concrete products, dense mineral foundations before applying gypsum and cement leveling plasters, latex putty lanceoles, adhesive stumps for tiles.

increases the clutch of putty, plasters and tiles to the surface. It is possible to process old tile coatings before laying new ceramic tiles on tile glue. Plot Conkontact Light PG100 is suitable for processing old, but firmly holding, oil and alkyd colors.

Clushing primer concrete contact Light PG100 is ready for a pink color.

The base for the primer should To be clean, durable, dry. Before use, it is necessary to mix the adhesive primer thoroughly. Apply a roller or brush using a painting bath. Do not apply at temperatures below from +5 ° C. Attention: in the process of use periodically, mix for uniform distribution of the filler on the surface.

almost without smell, non -toxic, fire -free, environmentally friendly material. water.

Precautions. Precautionary measures. It is necessary to carry out work in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves and a spire. If the materials get into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor.