Concrete contact for internal work "Optimum", 12 kg

The concrete contact of the Optimum Clushes for internal work PG110 TM "Professional" with quartz filler is used for preliminary processing of concrete, concrete blocks, foam concrete products, dense mineral bases before applying gypsum and cement leveling plasters, latex putty, adhesive stream Inside the premises.

The primer PG110 increases the adhesion of putty, plasters and tiles to the surface. It is possible to process old tile coatings before laying new ceramic tiles on tile glue. Plot Conclusions Optimum PG110 is suitable for processing old, but firmly holding, oil and alkyd paints.

Clushing primer concrete content optimum PG110 is ready for use, in the mass of pink color. The base for the primer should be clean, durable, dry. Before use, it is necessary to mix the clutching primer thoroughly.

apply a roller or brush using a painting bath. Do not apply at a temperature below from +5 ° C.

Attention: during use periodically mix for uniform distribution of the filler on the surface.

practically without smell, non -toxic, fire -free, environmentally friendly material.

Immediately after the end of work with the material, rinse the tool with a large amount of water.

precautions. Precautionary measures. It is necessary to carry out work in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves and a spire. If the materials get into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor.