Convector Ballu Red Evolution BiHP/R-2000, 2 kW, up to 25 sq.m.

Thanks to the improved system of combined heating, combining environmentally friendly infrared heating and a directed convective flow, the variety of technological modes and functions, the Red Evolution convector will create a comfortable temperature in a room of any type.

The process of heating the room is as follows: cold air enters the convection chamber through the air intake. Further, the air passes through the heating plates system. Heating plates emit infrared rays that heat objects in the room. In the convection chamber, the air, heated, rises up and goes through the air outlets.

Technical data

- the heating power is complete: 2000 W

- half heating power: half: 1000 W

- Recommended area: up to 25 sq. M

- Class of Protection: IP24

- Electric protection class: I class

- Dimensions: 41.3x80x11.3 cm

- Weight: 5.4 kg

operating modes:

- comfortable (mode of work with the temperature set by the user)

- in this mode, the convector supports the temperature set by the user < /p>

- the maximum temperature that can be set, 35C, the minimum 5C with a step of 0.5C

features

- combined heating system: convective and infrared

- an improved DX -Power heating element of two aluminum alloys with anodic coat coating, which is characterized by an increased intensity of heat transfer

- the intake of the increased area

is a reliable mechanical an intuitive control panel

- a modernized perforation for the most extensive scattering of heat

- the mode of full and half power

- spray -protective IP 24: the elements of the control panel are enclosed in a spacesuit, which provides protection against spray falling at any angle and makes it possible to use the convector in bathrooms and other rooms with moisture sources

- the convector control is controlled using a panel located in the upper part of the device < /p>

- by pressing the ON/OFF switch on the convector control panel, the device will go to the operating mode

- you can choose the required heating temperature using a regulator located on the control panel

- Auto Restart

installation

- install the device on a flat dry surface

- do not use the convector if the power cable or the plug fork are damaged, as well as if The device is faulty, damaged in the fall or under other circumstances. The heater should be operated only in the collected form