Convector IVIGO EPK4570E10 White, 1 kW, up to 10 sq.m.

This series implements all the main functions that allow the operation of the convector light and safe.

the case of the IVIGO electric convector is made of high -quality cold steel sheet with a thickness of 0.8 mm and was reinforced with a 1 mm thick frame to give a larger structure rigidity.

Features

- X -shaped heating element

- a timer for turning on and off

- a multilevel security system

- informative display

- does not burn dust, does not dry the air, silent work

- a castle from children

- a folding handle for easy carrying

- the legs in the set

functions of the convector IVIGO:

- the current temperature in the room

- the devices of the EPK E series are equipped with a temperature sensor, which is located inside the case. It allows not only to monitor the temperature indoors, but also displays it on the convector screen for additional informativeness. The convector itself can be adjusted to maintain a temperature of 6 to 30.

a timer for turning on and off. This function allows you to program the convector for inclusion for up to 48 hours so that it will turn on to a certain hour. This is convenient, for example, if you have gone to work and knowing the exact time of returning home, you can program the inclusion of the device by a certain hour. The convector shutdown function can be programmed by an already operating device for the time of shutdown up to 8 hours. A convenient function if you, for example, know that you will leave for a long time after some time, and in order to protect yourself and not remember more about the heater, you can install such a timer in advance. In this series of convectors IVIGO, this mode is not in a separate function, but you can configure it by simply setting the convector to maintain a minimum temperature of 6C.

electricity consumption indicator. The power scale on the convector screen is divided into 4 fragments, each illuminated fragment displays 25 capacities of the heating element, for example, if you operate a convector with a capacity of 1000 watts and one fragment, means the device consumes 250 watts of electricity.

restart. In case of interruption of electricity after the power supply, the device will continue to work on the settings that were tuned before.

with this button, you can block and unlock the device. suspended until the heater is again put in a vertical position.

All heaters are equipped with a long 2-meter cable, which allows you to connect the device to any outlets without the use of extension cords.

In the heater cables, an irradiation technology is used to prevent copper oxidation.

the main characteristics

- the heating area: 10 msup2;

- Power: 1000 W

- thermostat: electronic

- display: there is

- series/control: EPK E series (electronic)

- case material: steel

- installation: wall/floor

- the color of the goods: white

- dimensions:

- width: 70 cm

- depth: 8 cm

- weight: 9.35 kg