Convector WWQ KM-15 white, 1.5 kW, up to 15 sq.m.

WWQ convector KM-15 is a household electrical heating device designed to heat the air only inside residential premises. In monolithic heating elements, the nichrome thread with a dielectric aggregate is located in an all -liter aluminum body with developed nut. When heated and cooled, all parts of the monoblock are equally expanding and narrowed, which excludes friction and the appearance of microcracks. They are silent in work and are very durable. The monolithic structure made it possible to minimize intermediate heat loss and even more reduce the temperature on the surface of the ribs compared to the heating elements.

The product has two modes of operation. The convector is equipped with a mechanical thermostat that allows maintaining the temperature at a given level. The mechanical thermostat has several advantages over electronic, especially when the voltage rides or less than the face value. As a rule, heaters with an e-alete thermostat when the voltage drop is disconnected or lost from the program and after restoring the voltage they need to be restrained or they are included in the factory installation (as a rule, this is a temperature in the area of ​​20-25 degrees), in this regard, more intake of the ethletroenergy occurs.

installed thermal protection, disables the device if the temperature of the heating element reaches a dangerous critical value. The convector WWQ KM -15 is equipped with legs with wheels, but can also be installed in a stationary on the wall using the attached fasteners.

- nominal power consumption: 750/1500 W (depending on the mode of operation)

- heating element: monolithic heating element

- thermal protection: there is

- thermostat: there is

- the length of the network cable: 1.6 m << /p>

- dimensions: 50x7x40 cm

- mass: 3.77 kg