Deep penetration primer, 5 l

The primer penetration of TM "Optimaster" is used for finishing concrete, brick walls, drywall panels and gypsum, cement plaster, other mineral, as well as wooden surfaces inside and out of the rooms.

Advantages:

• forms a transparent film and evens out the absorption of the base for uniform application of finish coatings (paints, varnishes, etc.);
• reduces the consumption of finishing materials;
• increases the penetrating penetrating (from 1 to 5 mm) and the fixing ability of coatings;
• prevents the appearance of bacteria, fungi and mold;
• is ideal for diluting water-dispersion colors;
• It can be used for priming floors before applying self -leveling mixtures.

The product is ready for use. You can buy a primer TM "Optimaster" in cans of different volumes.

Properties:

• A primer of deep penetration with virtually smell;
• is non -toxic;
• fire and explosion-proof;
• environmentally friendly material;
• can be used for finishing in children's premises, subject to precautions.

Application conditions: Air temperature and the processed surface from +5 ° C to +35 ° C, humidity - 65 ± 5%.

System of application:

• The surface should be pure, strong, dry, cleaned of dust, dirt, from exfoliated and obscure old paint, if necessary, degreased;
• Mix the primer carefully before use; (In most cases, one layer is enough, for strongly absorbing surfaces, at least two layers are recommended);
• after completely drying to the primed surface, the finish coatings can be applied.

: 100–150 ml/m2 (depending on the method of application and absorbent capacity of the base). ° C and relative humidity - 65 ± 5%. When atmospheric conditions change, the drying time may increase.

the tool care: immediately after the end of work with the material, rinse the tool with a lot of water.

storage and transportation: Store 18 months from the date of manufacture of manufacturing In a closed original package at a temperature of +5 ° C to +30 ° C, protecting from moisture, heat and direct sunlight. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its properties.

precautions: it is necessary to carry out work in the open air or in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets onto the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.