Dvin-Ak 1180 Waste Interior, Superpoele, PM-110, 13.5 kg

Interior washing is a super -efficient for work in rooms forms an even matte surface. Suitable for applying to plastered, concrete, gypsum, brick, wooden and other porous surfaces, as well as wallpaper, drywall, chipboard, DVP.

• Multiple wet cleaning is allowed.
• The color is super -bud, does not change after time.
• is resistant to scratches and abrasion.
• High vapor permeability.
• Fast process of drying.
• hides surface defects.
• Tixotropic.
• practically without smell.
• does not contain volatile, toxic components, environmentally friendly.
• Fire and explosion-proof.

application system. Before applying the paint, it is necessary to prepare the surface responsibly. It should be clean, durable, dry, cleaned of dust, dirt, from the exfolved and obscure old paint, if necessary, degree. It is recommended to cover the surface with an interior covering primer, which will strengthen the surface, give it excellent superficial - adhesive properties.

application. Mix thoroughly before applying the paint. Apply with a brush, roller or spray gun. A two -layer application is recommended, with drying between layers of 2 hours. To reduce the viscosity, the paint is allowed to dilute the TM “Veme” with a primer, but not more than a 5% ratio.

drying time. “For Pink” - 1 hour, full - 24 hours at a temperature of +20C and air humidity 65%. Reducing temperature and increased humidity greatly complicates film formation and requires more time for this.

consumption. 250-400 g/m², depending on the absorption of the surface

tinted.,/B> The paint can be stuck in any color according to any tinting system.

tool care. Immediately after the end of work with the material, rinse the tool with a large amount of water.

storage and transportation. Store 12 months in a closed original package at a temperature of +5 ° C to +30 ° C. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its qualities.

precautions. It is necessary to carry out work in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

Composition. Acrylic latex, titanium dioxide, fillers, thickening, technological additives, water.