Ecola connecting connector for a one -color tape, 10 mm

Ecola connecting cable for LED tape with 2 contact clamping connectors of 10 mm. For a flexible connection of two tapes (rotation, bypassing the angle, passage to the hole) or connecting the connecting board. The cable is designed to connect two one -color tapes with a 10 mm wide. The clamping connectors located on both sides of the cable have good mechanical strength (up to 3 kg) and high electrical conductivity (up to 6 amperes, that is, at a voltage of 12 volts, 72 watts are obtained). Modern connectors of good quality will allow you to quickly and efficiently perform the installation of the tape of any configuration without any damage for reliability and without risk to spoil or burn something with a soldering iron. In addition, the connectors are "multiple" - that is, they can both install and shoot them. Collect and install the adapter design - the tape can be in a couple of minutes. From the side of the clamping connector, you can clamp either the end of the tape or one end of the flexible connecting board. The installation takes a couple of seconds - insert the tape under the contacts and press the lid. Removing - Put a lid and remove the tape.