Facade paint "Renoton" White, matte 14kg

• The paint is characterized by a high degree of adhesion to the base and hidingness in 1-2 layers.
• is easily applied, forms a white matte washing coating.
• prevents the growth of bacteria, mold and fungus.
• It is fireproof and non -toxic.

Scope

• is suitable For internal work.
• is used for coloring any types of mineral facades, as well as walls and ceilings inside dry and wet rooms. It is used for corridors, bedrooms, living rooms, hallways, bathrooms, offices and inside industrial premises.

is suitable for the following types of surfaces

• brick.
• Concrete.
• plastered.
• wooden (except sex). Old paint and whitewashing. The base should be clean, durable and dry.
• align the irregularities of the wall with putty and grind the surface.
• Thoroughly mix the paint. Apply with a brush, roller or spray from the corner to the corner on the principle of “wet on wet.”
• Observe the time of the intermediate drying: make sure that the previous layer is dry before the new one.

work at a temperature of at least +5 ° C. It is not recommended to apply the paint during rain, at minus temperature or at strong sunlight and temperature above +25 ° C. To reduce the viscosity, dilution of the paint (or water) to 5 % of the mass is allowed. The paint can be tinted with water pigment pastes. After work, the tools should be washed with water.

consumption and drying time

average consumption: 0.5–0.6 kg/m² in 2 layers on a primed smooth surface. Consumption on porous bases, such as shagren or bark beetle: 0.8–1 kg/m² in 2 layers. Drying for casting: 1 hour. Complete drying: 48 hours at a temperature of +18 ° C.

safety measures

are not recommended to mix with other types of paintwork and solvents. If you get on the face and eyes, rinse these areas with warm water.