Falcon Eyes Cinema Pro vt-1750

Falcon Eyes Cinemapro VT-1750-a great solution for visiting video and photo shooting a small DSLR or a video camera. A precision 2D video head with liquid damping, installed on a 5-sectic tripod, will hold a camera weighing up to 5 kg and will make smooth and dynamic panoramas.

A strong, compact and incredibly stable tripod is designed for reporting, sports, news and any other shootings on the trip or away. The length of only 425 mm makes it the most compact professional tripod of the Falcon Eyes Cinemapro series.

In the design of a 5-sequent clip tripod, an aluminum profile of a complex section was used with a ratio of width to a height of 2: 1. What makes it with a weight of only 1.5 kg resistant to twisting loads that occur during horizontal panoraming. The central column with a hook for the cargo increases the height of the camera installation to 1750 mm.

2d video heading with liquid damping for smooth panoraming

2D video heading with liquid damping allows you to make smooth horizontal and vertical panoramas. Horizontal panoramics can be carried out without restrictions by 360 °, and the slope is in the range from -80 ° to +90 °. A video heading has a panoraming stoppage, which can also be used as regulators of damping force. The head recorded with a tilt of 90 ° will make it possible to make vertical personnel in a photo or video.

The head is equipped with a fast-removable platform of Arca-Swiss 32mm with a 1/4 screw for installing a photo or video camera. The site is in advance to a photo or video camera so that the camera is installed on a tripod with one movement of the hand right before shooting.

A quick -removable platform is started in the guides and pressed by a lock in this position to balance the camera relative to the vertical axis of the tripod with a shift in the right direction.

The constructive of the Arca-Swiss site eliminates an accidental slipping of the site from the guides when unlocking the latch.

A removable handle 200 mm long for controlling the camera is attached to a tripod head using a latch. It has an ergonomic rubberized handle for comfortable holding in the hand.

The standard 2D video heading is replaced and can be replaced by any other head or a smartphone holder, which can be installed on a 3/8 'screw-triper screw directly, or through the Falcon Eyes SP-H F8M4 adapter. The head is pressed to the tripod site using three screws, which avoids scrolling during horizontal panoramas.

Sustainable and compact video studio-trinket

The height of the camera installation can be adjusted by the extension of the telescopic legs of the tripod, changing their angle of inclination and adjusting the position of the central column.

The compact 5-secto-sectional tripod is equipped with clip clamps that independently fix the telescopic sections of the legs to set the desired shooting height. Three fixed working positions of the legs of the tripod are provided. To install the leg in the next position (with a large angle of inclination), click on the lock lever.

The tripod legs are equipped with rubber bloodsters, which, thanks to the hinge base, are able to compensate for the irregularity of the floor or soil.

The reverse central column allows you to make frames at any height. This will come in handy for filming in the crowd, macro -seam or filming from the lowest point. To change the focus of the column, no tools are required, just press the column lock and pull it out of the tripod.

The column is made of a hexagonal aluminum pipe to avoid scrolling during panoraming.

At the end of the column, there is a hook for the cargo to make the tripod even more stable. As an increase, you can use a Falcon Eyes SP-BG5 sand bag.