Falcon Eyes Cinemapro VT-1800h Dilocyes

The tripod Falcon Eyes Cinemapro VT-1800H stabilizes the position of the equipment during video shooting with light and medium DSLR frames, video cameras or camcorders. Removable 2D-video-headed with liquid damping and constant counter-balance is designed for a load of up to 5 kg, the trip can withstand up to 10 kg, including an additional body kit.

The tripod is suitable for most popular video cameras or cameras Nikon, Canon, Sony, Panasonic, Olimpus and other manufacturers. To do this, in the chamber case, a threaded hole is used 1/4 "or 3/8".

2D -infected video heading of the tripod rotates around its axis by 360 and bend in the range from +90 to -75 for a smooth horizontal and vertical panoraming. The head is made of light and durable aluminum-magnesium alloy, equipped with a fast-removable platform, a removable handle and a bubble level. A tripod head also provides a 3/8 threaded hole for installing additional equipment or a body kit: lighter, microphone, monitor.

The video heading is removable, the design of the head provides for the installation not only on the ball base of the tripod, but also on the monopod, a slider and other holders with a ball support with a diameter of 75 mm or the corresponding threaded hole.

The liquidated damping mechanism extinguishes vibration, makes the rotation of the camera smooth and eliminates jerks at the beginning and end of the chamber.

The mechanism of constant (pre -installed) counter -base creates an effort returning the inclined chamber to a horizontal position and preventing the tripod overstowns.

A quick -detachable platform with rubber lining and screws 1/4 and 3/8 "for installing the camera helps to balance the center of gravity of the equipment relative to the central axis of the tripod (40 mm stroke). The camera with an attached platform is assigned in advance on a tripod with one movement of the hand, and is also easily dismantled, while maintaining stability during shooting. The platform fixer reliably protects the camera from the slinking from the guides, even if the stoppoint of the site is released.

A removable handle 38 cm long is installed in the gear jet of the handle located on both sides of the head for convenience with the left or right hand.

The aluminum triple is a 3-sequentary frame structure with legs from light tubes Ø20 and 14 mm. Savings sections are independently put forward and fixed with clip clamps, which makes it possible to set a tripod on an uneven surface. The lower sections of the supports end with spikes on which rubber supports are put on for contact with the surface. Bashmaki supports provide stable clutch on the smooth floor, and the spikes with soil. The height of the tripod is adjustable from 90 to 184 cm, in folded form the length of the tripod is 91 cm.

The transverse stretch attached to the average sections of the tripod is located horizontally in the working position of the tripod supports, determines the measure of the legs and enhances the structure.

A cover with strong handles and a shoulder storage and lap for a tripod is included in the kit. The walls with a soft seal are amortized by random blows, protecting the tripod from damage. The cover is fastened with a zipper and is able to accommodate not only a tripod, but also another additional equipment.