Finnish varnish, matte, 10 kg

properties. Non -toxic, fire -free, environmentally friendly material. Ready for use, is not diluted.

consumption. 70-200g/m2, depending on the type of stained surface and the need to obtain one or another decorative effect.

composition. Latex acrylic, thickening, technological and matting additives, water.

Tool. Spatula, sponge, brush, roller

tool care. Immediately after the end of work with the material, rinse the tool with a large amount of water.

the conditions of application. The air temperature and the processed surface from +5 ° C to +35 ° C. Do not allow drafts.

the drying time. 24 hours.

The expiration date. 1 year from the date of manufacture.

storage and transportation. In a closed original packaging at a temperature of +5 ° C to +30 ° C.

Precautions. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If it enters the skin - remove a cotton swab with a cotton swab and rinse the contaminated area with a plentiful amount of water.

tinting. To give the coatings additional decorative properties, it is recommended to tint “finish-psy” with decorative additives Optimist -elite (gold, silver, bronze, mother of pearl, sequins). It should be borne in mind that when the tinted finish-varnish is dried, color saturation is enhanced. The surface on which the finish-clip is applied should be completely dried. Mix the material thoroughly before application. It can be applied to the surface with a spatula “on the cut”, which allows you to manifest the planned drawing, because The recesses are filled with material, and only a translucent layer remains on the main surface. It is recommended to apply in 2 layers.