Foot Massage baths Centek CT-2602, 325 W, 3 modes, IR heating, 12 rollers, gray

Massage Foot baths CENTEK CT-2602 will help you check the spa procedure at home, relax after a hard day. "Style =" Font-Size: 18px "> Massage facilitates blood access to tissue, relieves veins and lymph vessels, muscle tension, reduces pain in the joints.

You can independently choose 1 of 3 massage modes:

• heating and bubbles;

• heating;

• bubbles.

the desired mode is selected using a switch.

vibration massage has a relaxing and light massage effect due to rollers. The massage bath for the legs of the Centek CT-2602 is equipped with 12 videos. The functions of automatic heating, maintaining water temperature, IR heating allow you not to be distracted by hot water and enjoy massage.

you can add aromatic Substances in a container for salt and essential oils.

work order.

1. Remove the electrical appliance from the box and remove the packaging material. Wipe the electric appliance case with a damp cloth.

2. Install the bath on a flat, dry surface. Make sure that the device is disconnected from the network, fill the bath with water to the Max mark (mark of the maximum water level). Use only tap water, do not add aromatic aromas, foaming additives and other means to the water.

3. Connect the network cord fork to the network. Sit on a chair or other piece of furniture, put the bath nearby and lower your feet in the water.

4. Using the device regulator, select the necessary mode: “heating”, “bubbles”, “heating and bubbles.”

5. In the “heating” mode, the water in the device will warm up to approximately 47 degrees (depending on the temperature in the room) and support it at this level. If the water is noticeably hot, turn off the “heating” mode and let the water cool. When the “heating” mode is turned on, the red indicator lights up.

attention! Always check the water temperature before immersing your legs in it.

6. At the bottom of the device there is an acupuncture coating on which you can drive the feet for massage the entire foot.

attention! The massage session should not last longer than 20 minutes.

7. After using the device, turn it off.

8. Remove your legs out of the bath, disconnect the network cord from the network and let the device cool.

9. Pour the water from the bath, use the water drain hose.

attention! Avoid water entering the panel with the regulator of the device. This can lead to its malfunction.

the use of the device is contraindicated:

• pregnant women;

• in the presence of various kinds of skin damage in the massage area, burns and skin diseases;

• during the period of taking painkillers and sedatives;

< Li>

wearing pacemakers.