Glass finish, half -material, 0.5 kg

properties. Non -toxic, fire -free, environmentally friendly material. Ready for use, is not diluted.

composition. Water dispersion of polymer, mineral fillers, pigment, cellulose derivatives, functional additives, water.

consumption. 70-200 g/m2 depending on the structure of the surface.

the conditions of application. The air temperature and the processed surface is from +15 ° C to +30 ° C. Do not allow drafts.

tool. Spatula, sponge, brush, roller.

tool care. Immediately after the end of work with varnish, rinse the tool with a large amount of water.

drying time. 24 hours.

The expiration date. 1 year from the date of manufacture.

storage and transportation. In a closed original packaging at a temperature of +5 ° C to +30 ° C.

Precautions. If the material gets into the eyes, it is necessary to rinse them with a large amount of water. If it enters the skin - remove a cotton swab with a cotton swab and rinse the contaminated area with a plentiful amount of water.

tinting. To give the coatings additional decorative properties, it is recommended to tint the “finish-psy” decorative pastes Optimist -elite (gold, silver, bronze, mother of pearl, sequins). It should be borne in mind that when the tinted finish-varnish is dried, color saturation is enhanced. The surface on which the finish-clip is applied should be completely dried. Mix the material thoroughly before application. It can be applied to the surface with a spatula “on the cut”, which allows you to manifest the planned drawing, because The recesses are filled with material, and only a translucent layer remains on the main surface. It is recommended to apply in 2 layers to enhance the decorative effect.