Glue from rodents and insects Rubit Killerkley 135 g

adhesive polymer mass for the manufacture of traps in order to combat mice, fields and rats in residential and utility rooms, basements, sewer networks, as well as to destroy household insects (cockroaches, ants, flies) and protect trees from garden pests. < /p>

non -toxic. Moisture -resistant.

to destroy rodents: apply glue to the substrates of dense cardboard, organ, plywood, etc. "heavy" materials in size of 30*20 cm or more. The glue is applied with an uniform layer, leaving clean fields with a width of at least 1.5 cm around the perimeter. In the center of the adhesive layer, pieces of food bait are placed (fried in vegetable oil, a piece of cheese, sausage, etc.). Glue can be applied with both a continuous layer and a closed strip at least 5 cm wide. Glue traps are placed at the rate of 3-5 sheets per 10 m² of floor at the places of movement of rodents.

to destroy household insects: apply glue to the glue to A substrate of paper, cardboard or other materials, leaving clean fields with a width of 1.5 cm around the perimeter, and flatter a uniform layer of 0.5-1.0 mm over the entire surface with a spatula, a plank, etc. You can place the bait in the center of the sheet: a piece of sugar, bread, etc. Place the substrates with glue applied in dark dry habitats and the movement of insects. To destroy the flies of the substrate with glue, lay out or hang flies in the places of clusters. In rooms with an area of ​​10 m², it is recommended to place 1-2 substrates. The product retains effectiveness for a month.

to destroy garden pests: apply glue directly to the tree trunk at a distance of 40-50 cm from the ground in the form of a ring, smooth out a uniform layer with a spatula, a plank, etc. Forming on a “glue belt” tree about 10-15 cm wide. The glue is resistant to wet weather and retains its qualities for a long time.

Precautions: When applying glue to the substrates, rubber gloves should be used. After working with glue, wash your hands with warm water and soap. If the glue gets onto the skin - remove it with a swab moistened with vegetable oil, kerosene or gasoline, then wash your hands with warm water and soap.