Glue Kleyberg 128 packing met. canister 1 l (0.8 kg)

for gluing rubber, leather, textiles, wood, facing tiles and in shoe industry on auxiliary operations: tightening

heels, gluing insoles, trays

glue equally well glues any materials , frost and vibro-stroke, completely retains its performance in the temperature range from- 40 ° C to +90 ° C, one-component, does not require additional introduction of the hardener. When working with it, cold and hot gluing methods are possible. It has an increased open exposure time.

Method of application

The adhesive temperature should not be below +18 ° C. Mix the glue thoroughly before use. The glued surfaces should be dry and clean. To achieve the best surface result, it should be cleaned with sandpaper and degreased. Apply an uniform layer of glue to glued surfaces, withstand 15-30 minutes. Combine surfaces and press within 10-15 seconds. To increase the strength of gluing, it is recommended to use double application. With a machine puff, the workpiece on the block, the adhesive film must be thermal activated. The temperature of the adhesive film should be from +30 ° C to +35 ° C. The final strength is achieved after 24 hours.

Storage

The Shelf life of 12 months in a sealed closed original container. storage rooms equipped with supply and exhaust ventilation, at a distance of at least 1 m from heating devices, with protection against direct sunlight.

, storage of glue at a temperature of 0 ° C to +35 ° C. < /p>

The recommended storage temperature of glue from +15 ° C to +25 ° C.

at the temperature of transportation and storage below +15 ° C, the glue goes into a jelly -like state. Before using such glue, it is necessary to restore: withstand the container with glue in a warm room, bring the glue to a temperature of +20 ° C. After restoration, the glue completely retains its properties, is used according to the method of use.