Glue "Moment Plastic" 30ml sh/b/10/120

The moment plastic is a special contact glue for a reliable connection of plastic products. Compatible with most plastic materials. Transparent. Waterproof. Soft and hard polyvinyl chloride, polystyrene, plexiglass and other types of plastic in various combinations glue in various combinations. Not suitable for gluing styropor, polyethylene, polypropylene, plasticized PVC.

of the surface should be dry and clean. Smooth surfaces are recommended to be cleaned with sandpaper to ensure better adhesion. Laminate and metal should be degreased with gasoline or acetone.

apply glue with a thin layer on both surfaces and leave for 15-20 minutes. Make sure that the glue is dry to the touch and does not stick to the fingers, and connect the surface. When gluing porous materials that absorb liquids well, an additional layer of glue may be required. With force, press the glued surfaces to each other. Press from the center to the edges to avoid air accumulation. Glue the edges thoroughly. The initial strength of gluing is enough to immediately subject the surface to further processing. The maximum strength is achieved after 3 days depending on the material and the force of pressing when gluing.