Glue-mother "Titan" Optilux 1.8kg

Preparation: Mix glue-mastic before use, if necessary, dilute with water no more than 5% of the mass work at a temperature of not lower than +5 ° Cubure to clean from dust, dirt, fats and oil spots, dry, crumbling and fragile areas of the surface, remove , level and dry the surface

gluing: glue-fashion is applied with a gear spatula on one of the glued surfaces with a layer of up to 4 mm dumplings of tiles, stone: tiles with applied adhesive-mastic, press 5-10 seconds of the joints only after drying out of the drying out of the drying out of the drying out of the drying out Depends on the temperature of the work, the thickness of the seam, the absorption of the ability and the area of ​​glued surfaces. The drying time for elements size is 30*30 cm at 20 ° C, a moisture content of 65% is 5 days. When gluing elements with a size of more than 30*30 cm, the adhesive seam drying time can significantly increase and repair the fireplaces and clad the tiles in a hot, trotted video tool and stains with water immediately after the end of the

heat -resistant (up to 1300 ° C)

Frost-resistant

Optimal viscosity

High adhesion to the base

fire-freezing

Consumption: 1.5-1.8 kg per 1 sq.m. surfaces