Hermetic of the sound layer, 500 ml

The sealant copes with the scuffs and cracking of the rim of wheels, disks and silent tires, and also restores the tire layer after repair work using patching and cold vulcanization.

The product is universally and easily applied to the reanimated surface. When using, follow the following rules:

• mark the repair site using a pencil or marker;
• Separate the disk from the side on a special machine and completely remove the tire;
• clean the surface, wipe it and degrease it;
• apply sealant in several layers with a brush, but only after drying each of them;
• The product dries in a few minutes, after which you can pump the tire to the usual state.

If after the repair you observe the continuing leakage of the air, then fit the place of the repair on the inside. This will help sealant more tightly, blocking all possible cracks.

For tires and discs of trucks, it is worth using another method that will not only increase efficiency, but also reduce sealant consumption. In this case, porous paper is used.

Advantages:

• sealing and restores the tire layer up to 4 mm;
• does not pass air and water;
• is easily removed from the disks, and even after thickening it can be diluted with a special solution and separated from any surface;
• The tool is not fiery and does not harm health.

Volume: 500 ml.

Material: Waterproof rubber.