Ice-brown two-handed LR-150D, left rotation

The upper handle of the LR-150D ice discovery is displaced relative to the axis of the screw by 130 mm, and the lower one is 150 mm. The drilling speed increases, and the load is evenly distributed into two hands and becomes inconspicuous. Since the storm of drilling with such drilling is smooth (without jerks), there is no effect of “biting” when passing the lower edge of the ice.

The folding handle reduces the transport dimensions of the ice discovery to 83 cm. The patented castle helps to quickly bring the drill to the working position, And also does not give a backlash when used. The ice -brow easily copes with the drilling of meter ice, despite the small size in a folded form. The drilling depth can be increased by adding extension cords of the U-400 or UD-250. Depending on what depth you need to increase the drilling, extension cords can be collected in any sequence with each other and attached to the drill. Perhaps drilling with a screwdriver with a torque of 100-120 nm using a reverse. To join the screwdriver, the UA-400 extension cord and the ASh-02 adapter will be additionally needed to the screw.

the twigs of the two-handed icebour are made of “warm” plastic, the most comfortable drilling is provided. 150 mm aims to block the empty niche in the interval between the diameters of 130 and 180 mm. In cases where the increased diameter of the hole is needed, and the use of the ice discovery by 180 is still inappropriate, the “hundred -fingers” will become an indispensable tool. Technical characteristics

• left rotation.
• Diameter of the drilling: 150 mm.
• Browding depth: 1070 mm.
• length in working position: 1546 mm.
• The length of the screw: 530 mm.
• Length in the transport position: 832 mm.

Supply set

• ice-brow assembly: 1 pc.
• knives: 2 pcs.
• screw m6x12 GOST 17475-80: 4 pcs.
• Protective case: 1 pc.
• Passport: 1 pc.