Interior sticker for a circuit breaker, wall mirror decor, 15x15 cm

Add an elegant detail to your interior with this stylish decor! A mirror sticker with a size of 15x15 cm and 1 mm thick is designed for installation around the light switch. Made in a form close to the square, it has a white mirror surface, which reflects light and visually expands the space. A variety of patterns are located around the perimeter of the product, which create the impression of a neat stencil.

Decorative elements give the sticker sophistication and make it an ideal addition to any modern or classic interior style. It is made of high -quality acrylic, this decor not only decorates the wall, but also protects it from possible pollution and damage around the switch. It is easily installed and retains its original appearance for a long time, due to which it will become a practical and beautiful element of your home.

• The sticker consists of three layers - a vinyl base with an adhesive layer, a protective substrate and below and below and below and Transparent film on top. Do not remove the protective film from the glossy part of the product until you finish work.
• Prepare the surface on which you will fix the sticker. Comers, clean from dust, if necessary, degrease with an alcohol solution or special liquid. The surface should be clean, dry, smooth.
• attach the sticker to the wall, outline the place where you want to glue it. If necessary, secure it with a masking tape to look from afar how it will look. If it suits, start gluing.
• Small stickers are simply glued: completely separate the lower substrate, carefully attach the sticker to the surface and press, smoothing with a rocket or a soft cloth from the center to the edges.
• a large sticker Attach a substrate to the wall and carefully separate a small part of it. Glue this edge, press and carefully stretch the substrate, simultaneously pressed the released parts of the sticker. Smooth the product from the center to the edges.
• If you need to dock the elements of the sticker, start from the largest. For example, if a sticker in the form of a tree, first glue the barrel, and then the branches.
• When the work with the sticker is finished, carefully remove the protective film. Get it away in the same way as the substrate was removed, pulling down or to the side.