Interior sticker under the switch "Wind", Wall mirror decor, 15x15 cm

Create an atmosphere of movement and dynamics in your interior with this stylish decorative sticker! The product is made in the form of a square in size 15x15 cm and a thickness of 1 mm and is designed to place the light around the switch.

The mirror surface gives the decor exquisite shine, and the patterns carved around the perimeter resemble gusts of wind, giving the composition lightness and airiness. Made of durable acrylic, this sticker not only serves to decorate the wall, but also protects it from pollution and mechanical influences around the circuit breaker.

it will perfectly fit into the modern design of the room, adding it of originality and unique style. Such an element of the decor will delight you every day with its beauty and functionality, creating a feeling of freshness and spaciousness in the room.

• The sticker consists of three layers - a vinyl base with an adhesive layer, a protective substrate from below And transparent film on top. Do not remove the protective film from the glossy part of the product until you finish work.
• Prepare the surface on which you will fix the sticker. Comers, clean from dust, if necessary, degrease with an alcohol solution or special liquid. The surface should be clean, dry, smooth.
• attach the sticker to the wall, outline the place where you want to glue it. If necessary, secure it with a masking tape to look from afar how it will look. If it suits, start gluing.
• Small stickers are simply glued: completely separate the lower substrate, carefully attach the sticker to the surface and press, smoothing with a rocket or a soft cloth from the center to the edges.
• a large sticker Attach a substrate to the wall and carefully separate a small part of it. Glue this edge, press and carefully stretch the substrate, simultaneously pressed the released parts of the sticker. Smooth the product from the center to the edges.
• If you need to dock the elements of the sticker, start from the largest. For example, if a sticker in the form of a tree, first glue the barrel, and then the branches.
• When the work with the sticker is finished, carefully remove the protective film. Get it away in the same way as the substrate was removed, pulling down or to the side.