KronBuild mounting foam, 350 ml

KronBuild mounting foam is a special tool for cleaning from the residues of unnecessary one -component polyurethane foam from metal, plastic and other undisturbed surfaces.

Effectively cleanses the internal and external parts of pistols for mounting foam, cylinders, working surfaces and clothes.

is easily applied in hard-to-reach places.

flushing and cleaning the pistol.

- Disconnect the cylinder with mounting foam from the pistol

- vigorously shake the cylinder with a cleaner

- clean the gun adapter of the remains of the foam

- install the nozzle on the cylinder with the cleaner and treat the nose, adapter and, if the foam remains in the cylinder, rinse the balloon valve with foam.

- Remove the nozzle and screw the cleaner cylinder on the adapter.

-To open the adjusting screw on the gun. Skip the cleaner through the pistol.

- if necessary, leave the cleaner inside the gun for 1-2 minutes, and then press the trigger and rinse the gun from the remains of the foam.

Cleaning unexplored spots:

- shake the cylinder with a cleaner

- install the nozzle on a cylinder with a cleaner.

- apply the cleaner to the spots of mounting foam. Wipe the processed places with dry cotton cloth.

Scope:

- Clean in a well-ventilated room.

- the optimum temperature of the cylinder and the environment: from -10 ° C up to +35 ° C

- before use on plastic, painted surfaces and fabric, make a preliminary test on an invisible surface area!

Attention! Use protective clothing, gloves, and use protective clothes and glasses