LED flexible tape IP20, 60LED/m, 12V, 2835, glow cold white

The designer flexible tape 12 V is used for advertising signs, as well as to create light compositions in modern interiors and exterior. The tape has a figure board that allows you to bend it on the plane along the radius and at an angle. Such a tape can be used to install on winding surfaces for illuminating objects of complex shapes. The tape is supplied in a roll with a soldered output of wires with a color designation for a convenient connection. The length of the tape is 5 m. The LED tape can be shortened by cutting off the desired part in places for cutting, and if necessary, lengthened using connectors.

The flexibility of the tape and a reliable adhesive base allow you to install the tape on various surfaces.

To connect the LED tape to the power supply network, lowering transformers that convert 220 V AC of 12 V DC (AC 220 - DC 12V) are used.

A wide range of ambient temperature allows the use of the tape in unheated rooms at a temperature of up to -25 ° C. The service life of the LEDs is 50,000 hours.

characteristics:

- the degree of dust and proximity IP20

- 1 meter of the tape consumes 6 W

- light The stream of 1 meter of the tape is 620 lm

- a reliable adhesive base for light installation on any surface

- the tape can be cut into a multiple of 50 mm

- the tape is equipped All necessary for installation and connection to the transformer

- cold white light with a temperature of 6500k