Liquid glass, sodium, 15 kg

Sodium liquid glass PK507 is designed to glue all kinds of building materials, as a binder in construction practice, in the manufacture of acid -controlled and refractory silicone masses, to fix the foundations of various structures from groundwater, is also used as an additive to cement solutions increasing their strength and water detainland. Sodium liquid glass PK507 is used for gluing glass and porcelain products, for gluing and impregnation of paper and cardboard.

Conditions for application. The processed surface should be dry and clean, recommended surface and air temperature from +10 ° C to +35 ° C, relative humidity - 65 ± 5%.

surface preparation. Clean the surface of obscure old coatings, dust, dirt, fat and other substances that worsen adhesion (clutch).

application. Mix thoroughly before use. Apply with a brush or roller. For gluing, apply on one or both glued surfaces with a thin layer. For use as an additive, add liquid glass of TM “Professional” to a construction solution in a volume of up to 5% of the total mass of the solution. When waterproofing walls, floors, ceilings, basements and other waterproofing works, add 10% liquid glass TM “Professional”. For the manufacture of waterproof plaster and acid and refractory solution, add 15% liquid glass TM "Professional".

consumption. 150-200 g/m2, depending on the purpose of application, the method of application and absorbent capacity of the base.

storage and transportation. Store 18 months in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from moisture, heat and direct sunlight. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its properties.

precautions. It is necessary to carry out work on the street or in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

Composition: sodium silicate, water.