EVA gel (gel patch - a sealant of punctures and cuts of EVA of shoes) is a specially designed product from Reaktor®, for the repair of winter shoes from EVA materials.
to achieve the best result:
< <
waste the puncture with a file with a file to 2 - 3 mm, and clean the cut with sandpaper, or other abrasive, removing the outer and inner smooth layers by 0.2 - 0.5 mm. Clean and degrease the puncture, cut, or other damaged surface by the Reaktor® activator, which is guaranteed to help achieve the maximum possible adhesion of the EVA with EVA materials. In the absence of an activator, it is permissible to use any alcohol, or acetone-containing solvent, but 100% of the result is not guaranteed in this case. is well, shake the tube 10-15 times to stir the ingredients. Apply an EVA gel on each side of the cut, or damage, wait 15 minutes. And tightly press the glued parts to each other. PROGOL Repair: waste the puncture with a file to 2 - 3 mm, leave the handle of the file in damage, from the side of the sole of the boot, apply the EVA gel to the puncture and slowly stretch the file from the side of the lower leg. In this case, the file works as a piston in a medical syringe, and will tighten the EVA gel into the depths of the damage, or tightly forget the puncture with a toothpick, or matches. - Complete polymerization will come after 72 hours. < /li>