Male Fortmen boots, Yenisei model, -75 ° C, size 44, graphite color

Men's boots of the Yenisei model are made of polymer-foamed ethylenevinyl acetate, which, due to its porous structure, consisting of many microscopic air bubbles, has a number of distinguishing properties:

• Thermal insulation: thick sole Excludes the freezing of shoes from the ground. The walls of the shoes have a thickness sufficient to ensure thermal insulation from cold air, while maintaining flexibility.
• Frost resistance and waterproofness: The technology of the casting method of production provides absolute tightness. The boot is entirely cast from the polymer.
• simplicity in care: after operation, it is enough to remove the dirt from the surface with a dry or damp cloth. If necessary, an insert stockings are easily removed and refuel. It is necessary to dry and ventilate the insulation after each use - this will last longer.
• The boots are equipped with multi -layer insulation. The insulation layers are carefully selected and each layer has its own functional purpose.

The composition of the insulation:

• woolen fur contains 80% of natural sheep wool. This natural heat -intensive material preserves heat from the inside well.
• 10 mm thick foam, reinforced on both sides. The foam rubber, due to its porous structure, is a good material for the formation of a natural air heat layer.
• Dublied material from a pile non-woven and dense knitted paintings. A layer of synthetic materials serves as a good adsorbent for excess moisture, which naturally occurs during overheating.
• The foil membrane serves as a thermal barrier inside and prevents the penetration of the cold outside. The folding valve in the front of the boot. This constructive detail facilitates putting on and tightly covers the front side of the lower leg from the cold. The heel of the insulation is stitched by a dense vinyl vilism to protect it from rapid wear.