Motoveobur Ski "Tonar" Motoshtorm 130r SMS-130R

A whole -set screw with a diameter of 130 mm and right rotation is designed for comfortable drilling ice with a motorcycle or electric motor in any conditions. The verified angle of attack makes the drilling fast. Reliable polymer coating withstands sharp fluctuations in temperature and strong mechanical loads.

a screw under the motorbike "Motostorm" was created for drilling using a motorbide or screwdriver.

to join the screw to the motorcycle shaft, you need to use a screw , a puck and a nut that are installed using keys S6 and S13 (included). It is allowed to join the motorized boots with the diameter of the output shaft from 18 to 20 mm.

When the screw is connected to the screwdriver, it is necessary to use the ASH-02 or ASH-03 adapter (additional option) and the M8 screw (in the kit). It is allowed to join the adapters with the diameter of the output shaft from 18 to 20 mm.

If the thickness of the ice is more than one meter, then the extension cord Ushm-250 or Ushm-400 must be installed on the screw, which will increase the drilling depth by 25 and 40 cm, : 1000 mm.

Supply set

• auger: 1 pcs.
< Li> Knives: 2 pcs.
• Barashka screw M8: 1 pc.
• screw m6x12: 4 pcs.
• protective case: 1 Li>
• screw m8x35: 1 pc.
• Work Ø8: 1 pc.
• Gaika M8: 1 pc..
• key S13: 1 pc.
• Passport: 1 pc.