Movement sensor w1155103 500 watts, two -wire, ivory
The built -in Werkel traffic sensor is specially created for connoisseurs of comfortable conditions and will help in automation of lighting.
it easily recognizes movement and automatically turn on the lighting. Upon stopping the movement, the sensor is automatically turned off through the time interval set by the regulator. The use of the motion sensor allows you to reduce the misuse of electricity.
the motion sensor is widely used to automatically turn on the light in the entrance areas, bathrooms, corridors, and stairs.
The mechanism is located in the way of following the illuminated room or directly in it. The light lights up when a person enters the detection zone, which is 9 meters with an angle of cover 160 °.
The sensor is designed to work with all types of electrical appliances. The maximum power of the connected incandescent lamps 500 W, LED lamps are 200 watts.
the motion sensor is supplemented by an adjustable light sensor, which allows you to configure automatic light on the light only in the evening. The key placed on the front panel allows you to turn on and turn off the load in manual mode.
to adjust the light sensor and the shutdown timer, the device is not required. The regulators are located under the decorative lid on the front panel.
The compatibility of all Werkel frames and mechanisms allows you to choose the optimal color and stylistic combinations suitable for any modern interiors.
| Characteristics | |
| A country | China |
| Color | Ivory |
| Degree of protection | IP20 |
| Detection angle, degrees | 160 |
| Height, mm | 34 |
| Length, mm | 70 |
| Power, W | 500 |
| Range, m | 9 |
| Service life, years | 10 |
| Tension, c | 220 |
| Type | Built -in |
| Type of installation | Built -in |
| Type of power | From the network 220 V |
| View | Motion sensors |
| Viewing angle, hail | 160 |
| Width, mm | 70 |
There are no reviews for this product.