Painting Washing Aquate VAK-20 Superpoe 2.5kg

Purpose and scope: for internal (including in wet rooms) and external works in places protected from direct rain, concrete, plaster, drywall, brick, wood and other porous surfaces. It has high adhesion and resistance to wet abrasion.

Method of application: Mix the paint before work, if necessary, dilute with water to the required viscosity. Pre -clean the surface of the dirt, lagging the old coating until completely removed, if necessary, roll up, primed and plunge. Apply in 1-2 layers with an intermediate drying at 1 hour at a temperature of 20 ± 2 ° C. At a temperature below 15 ° C, the drying duration should be increased.

Method of application: brush, roller or sprayed.

The time of complete drying: 12 hours. On a single -layer coating: 220 g/m². Use at air temperature and substrate above 8 ° C.

Composition: acrylic dispersion, fillers, special additives, water.

Solvent: Water.