Press to close the rear covers

Press for replacing the back cover of the clock. The set of 12 screw fluoroplastic nozzles of different sizes (18 - 50 mm), which allows the use of a press with a clock of any size and shape.

The design of the press provides uniform pressure over the entire surface of the nozzle.

The use algorithm:

select the puck along the diameter of the glass of watches, or rather along the edge of the rim around the glass. It is necessary to choose a puck of such a diameter that its convex board does not rest on the glass, but on the case around it. Then we screw the puck to the lower rod of the press.

select the puck for the back cover of the watch. We must try to choose the puck so that its convex edges are as close to the edge of the lid. But in this case, this is not as critical as with glass, we take the puck, which is more or less equal to the diameter of the lid and screw on the upper rod of the press.

We put the clock in the press with glass down, the lid up. And click on the press lever.