Primer for internal work, 5 liters

The primer for internal work of TM "Optimaster" is used for decoration of concrete walls, brickwork, plasterboard panels and gypsum, cement plaster, other minerals, as well as wooden surfaces inside and out of the room. It can be used for priming floors before applying self -leveling mixtures. It forms a transparent film and evens out the absorption of the base, which contributes to a more uniform application of finish coatings (paints, varnishes, etc.) and reduces their consumption. Increased penetrating (from 1 to 5mm) and reinforcing ability. Prevents the growth of bacteria, fungi and mold. Ideal for diluting water-dispersion colors.

properties. The primer for internal work is virtually no smell, non-toxic, fire and explosion-proof, environmentally friendly material.

conditions of application. The air temperature and the processed surface from +5 ° C to +35 ° C, humidity - 65 ± 5%.

application system. The surface should be clean, durable, dry, cleaned of dust, dirt, from the exfolved and obscure old paint, if necessary, degree. Mix the primer carefully before use. Apply with a brush, roller or spray gun. In most cases, one layer is enough. For strongly absorbent surfaces, at least two layers are recommended. After completely drying to the primed surface, the finish coatings can be applied.

consumption. 100–150 ml/m2 (depending on the method of application and absorbent capacity of the base).

drying time. “For Pink” - 0.5 hours, full - 12 hours, at a temperature of +20 ± 2 ° C and relative humidity - 65 ± 5%. When atmospheric conditions change, drying time may increase.

tool care. Immediately after the end of work with the material, rinse the tool with a large amount of water.

storage and transportation. Store 18 months from the date of manufacture in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from the effects of moisture, heat and direct sunlight. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its properties.

precautions. It is necessary to carry out work in the open air or in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children. Compound. Acrylic latex, technological additives, antiseptic, water.