Protective impregnation with the effect "Natural Stone", 5 liters

Protective impregnation with the effect of the natural stone PC405 TM "Professional" is used as a finish coating for processing natural and artificial stone, red and silicate brick, asbestos -cement, shifer, tiles, as well as products made of reinforced concrete, foam concrete and CPS for protection surfaces from moisture absorption. Protective impregnation of RS405, penetrating inside the material, does not create a visible layer on the surface, providing the appearance of natural natural stone. It prevents the growth of bacteria, fungus, mold and forms a vapor permeable water -repellent layer.

the conditions for applying protective impregnation natural stone. The processed surface should be dry and clean, recommended surface and air temperature from +5 ° C to +35 ° C, relative humidity - 65 ± 5%.

surface preparation. Peel the surface of dust, dirt, oils and other contaminants that interfere with uniform application.

application. Mix thoroughly before use. Apply with a brush, roller or spray gun.

consumption. 100-250 ml/m2, depending on the method of application and absorbent capacity of the base.

drying time. Complete drying after 24 hours, at a temperature of +20 ± 2 ° C and relative humidity - 65 ± 5%. When atmospheric conditions change, drying time may increase.

storage and transportation. Store 18 months in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from moisture, heat and direct sunlight. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its properties.

precautions. It is necessary to carry out work in the open air or in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.

Composition: silicone hydrophobizator, technological additives, antiseptic, water.