PVA glue, super -sitting, 20 kg

PVA glue super -linked PK502 is used for gluing products of wood, paper, cardboard, glass, porcelain, fabrics, as well as for gluing linoleum on felt basis, wallpaper, heavy vinyl wallpaper, wall coatings and facing tiles, and other products operated indoors. It has increased adhesive ability. The glue of the RK502 can be used as an additive in cement solutions and oil-red putty to increase their strength and elasticity.

Conditions for application. The processed surface should be dry and clean, recommended surface and air temperature from +5 ° C to +35 ° C, relative humidity - 65 ± 5%.

surface preparation. Clean the surface of obscure old coatings, dust, dirt, fat and other substances that worsen adhesion (clutch).

application. Mix thoroughly before use, apply a thin layer to one of the glued surfaces, connect to the other and press. The maximum effect is achieved by tight compression of glued surfaces until completely dry. Before adding to construction mixtures (cement, polymer, gypsum, lime), it is recommended to check for compatibility, adding to a small amount of the mixture.

consumption. 400-500 g/m2, depending on the method of application and absorbent capacity of the base.

drying time. Complete drying after 24 hours, at a temperature of +20 ± 2 ° C and relative humidity - 65 ± 5%. When atmospheric conditions change, drying time may increase.

storage and transportation. Store 18 months in a closed original package at a temperature of +5 ° C to +30 ° C, protecting from the effects of moisture, heat and direct sunlight. If the packaging has an additional “frost -resistant” label, transportation is allowed at a temperature of up to -25 ° C. When freezing the product, thawing at room temperature naturally. After thawing, the product retains all its properties.

precautions. It is necessary to carry out work in a well -ventilated room using personal protective equipment for respiratory organs, vision and skin: glasses, gloves, respirator. If the material gets into the eyes, it is necessary to immediately rinse them with a large amount of water. If the material gets on the skin, remove it with a cotton swab and rinse the contaminated area with a plentiful amount of water. If necessary, consult a doctor. Protect from children.