Sani Volokushi Centerplast 1800 with a chipper with overlays, 196 x 80 x 67 cm

Technical characteristics:

The size of the sled without a breath:

• without a chipper 1730 x 730 x 350
• with a chipper 1950 x 750 x 650 < /li >

weight sledges: 16.8 kg

Saler lifting capacity: up to 300 kg

equipment:

• Sani 1 pcs
• Binding 1 pcs
• Dad with a damper and a gym-gayka 1 pcs

Material: Primary low pressure polyethylene (PND). The main operational properties:

• strength, plasticity, durability.
• resistance to aggressive media, to organic solvents, to ultraviolet
• retains properties in the range temperatures from -43 ° C to +53 ° C

linings: if you carry heavy loads or travel along asphalt, land, grass - linings are required! This is a consumable that protects the bottom of the sled from abrasion and improves controllability. We compose a sled with two types of linings, depending on the model: 8 mm or 15 mm. All linings on the sled contain graphite to reduce abrasion. Sani with overlays are delivered assembled and ready for use.

• 8 mm linings - with skates, attached to the bottom of the sled to rivets;
• 15 mm linings - without skates, Due to the thickness, they go 2 times longer, attached to the bottom of the sled to self -tapping screws;

metal frame (binding): all over the perimeter a metal frame is attached from a thick -walled pipe, in which there are slinging rings that allow reliably allowing To fix the load. The frame is attached to the sleigh with reliable rivets steel-old.

Dad (trailed device): Sani are equipped with a breath of the corresponding size with the damper and the Rym Gayka. Easy installation on quick -detachable codes. Spring damper in the trailer softens softens from place and braking, reducing the load on the transmission of the snowmobile.